30Adjusting the VolumeWhen you use the LCD screen for playback, the camcorder plays back the sound viabuilt-in speaker. The speaker does not sound when you close the LCD panel. Useheadphones when using the viewfinder.When Using HeadphonesThe headphones terminal also serves as AV terminal. Headphones can only be usedwhen “H” is displayed on the screen. If not, change the setting following theprocedure below.Open the menu and select [VCR SETUP]. Select [AV/PHONES H], set it to[PHONES H] and close the menu.❍ The speaker does not sound when “H” is displayed.❍ Do not connect headphones unless “H” is displayed as it produces noise.Adjusting the VolumeTurn the SET dial up to increase the volume, and downto lower the volume.• A volume bar appears for 2 seconds.• You can turn off the volume completely by turning the SET dialdown until [OFF] appears. Turn the SET dial up to increase the volume again.CARD PLAYCARD CAMERAPLAY (VCR)CAMERACARD PLAYCARD CAMERAPLAY (VCR)CAMERASET dialSpeakerH (phones) terminalAV/PHONES ••AVVCR SETUP( 35)
