92Transferring Using a USB CableUse a video editing software to transfer video recordings from the tape to thecomputer, edit them and upload them from the computer to the tape. You can alsoconvert analog signals to digital signals and transfer them to the computer. Fordetails, refer to the DV Network Software Instruction Manual.1. Install the Canon USB Video Driver supplied with the DV NetworkSoftware.See Installing Only the Canon USB Video Driver in the DV Network Software InstructionManual.2. Connect the power adapter to the camcorder.3. Set the camcorder to PLAY (VCR) mode.When transferring video recordings from/to a tape, make sure that “AV \DV” is notdisplayed. When using the analog-digital converter, make sure that “AV \DV” isdisplayed. Change the settings as necessary ( 87).4. Connect the camcorder to the computer using the USB cable.Make sure that camcorder and computer are not connected with a DV cablebefore connecting the camcorder to the computer using the USB cable.Otherwise, the computer may not operate properly.CARD PLAYCARD CAMERAPLAY (VCR)CAMERAWindows XP/Hi-Speed USB 2.0 Only
