60❍ The audio level can be changed when the green bar is displayed. Werecommend hiding the bar when you have finished adjusting to preventaccidental changes.❍ The microphone level resets to [AUTO] when you switch the program selector to [.❍ We recommend using headphones when manually adjusting the audio level.Microphone AttenuatorUse the microphone attenuator if you need to lower the volume level or correct audiodistortion during recording or audio dubbing. Check the audio level with headphones.Open the menu and select [AUDIO SETUP]. Select [MIC ATT], set it to [ON]and close the menu.Using Headphones during RecordingThe headphones terminal also serves as AV terminal. Headphones can only be usedwhen “H” is displayed on the screen. If not, change the setting following theprocedure below.Open the menu and select [VCR SETUP]. Select [AV/PHONES H], set it to[PHONES H ] and close the menu.Adjusting the Headphone VolumeOpen the menu and select [AUDIO SETUP]. Select [ H VOLUME], adjust thevolume with the SET dial and close the menu.You can turn off the volume completely by turning the SET dial down until [OFF] appears.Turn the SET dial up to increase the volume again.CARD PLAYCARD CAMERAPLAY (VCR)CAMERACARD PLAYCARD CAMERAPLAY (VCR)CAMERACARD PLAYCARD CAMERAPLAY (VCR)CAMERAAUDIO SETUP MIC ATT••••••OFF( 35)VCR SETUP AV/PHONES ••AV( 35)** Only when [AUDIO DUB.] is set to [MIC IN].HVOLUME•••••AUDIO SETUP( 35)
