38EUsing the FullRange of FeaturesSearching and Reviewing While RecordingWhen the camcorder is in record pause mode, you can use record review to playback the last few seconds of your recording and then return automatically torecord pause mode. You can quickly make sure that a scene has recorded properlyand then go on to shoot the next scene, without producing any noise in the picture.1. Press and release the c (record review) button while you check thepicture in the display.• The camcorder rewinds the tape, plays back the last few seconds, and returnsto record pause mode.Note:• Noise may appear on the screen when you play the tape backwards.RECSEARCH RECSEARCHWhen the camcorder is in record pausemode, you can use record search toplay the tape forwards or backwards tofind the point where you want to startor resume recording. This is usefulwhen you want to add a new scene to apreviously used cassette. By usingrecord search, you can ensure a smooth,noise-free join between the new sceneand the old one.Record searchRecord review1. Press and hold the REC SEARCH + or – button on the camcorderwhile you check the picture in the display.• The + button plays the recording forwards and the – button plays itbackwards.2. Release the button when you find the point where you want to startrecording.• The camcorder returns to record pause mode.CAMERACAMERA
