44EUsing the FullRange of FeaturesTo prevent interference from otherCanon wireless controllers being usednearby, there are 2 remote sensormodes and an off setting. The wirelesscontroller and the camcorder have to beset to the same mode in order to becompatible.To turn the remote sensor off:Open the menu and select SYSTEM. Then select WL.REMOTE, set it toOFFB and close the menu.• B appears in the display.To change the mode......on the camcorder:Open the menu and select SYSTEM. Then select WL.REMOTE, set itto A 1 or A 2 and close the menu.• The selected mode will appear on the display for 4 seconds....on the wireless controller:Press and hold the REMOTE SET button on the wireless controller.Simultaneously press the ZOOM W button for mode 1 or the ZOOMT button for mode 2. Continue to press simultaneously for over 2seconds.• Be sure to set the wireless controller to the same mode as the camcorder.A 1 : Mode 1A 2 : Mode 2OFFB : Sensor offWL.REMOTE••• 1SYSTEM( 39)The wireless controller and the camcorder have been preset to mode 1. If youchange the mode on the camcorder, be sure to change the mode on the wirelesscontroller to the same mode.REMOTE SETZOOMW T, PLAY(VCR)CAMERAWhen Operating 2 Canon DV Camcorders (Remote Sensor Mode)
