83EEditingConnecting the camcorder to your VCR or 8 mm video camcorder allowsconversion of recorded analog video and audio signals to digital signals in aninstant. The digital signals can be output to the other equipment with a DVterminal. The camcorder’s DV terminal works exclusively as an output terminal.• There may be cases where analog-digital converter cannot be done properly,depending on the signals output from the connected equipment.For example: Signals that include the copyright protective signal, or anomaloussignals such as ones that include ghost signals, etc.• You cannot use your headphones during digital conversion. Even if theAV/headphone terminal is set to “PHONES” through the menu, it willautomatically be set to “AV”, and “PHONES” will disappear from the display.• You are recommended to use power from a household mains outlet with thepower adapter.• Do not operate with a cassette inserted to the camcorder.• Turn off the power of all equipment before performing connections.• Refer also to the instruction manuals of the other equipment connected.Digitally Outputting Analog Video and AudioSignals — Analog-Digital Converter (MV500i only)AVMICDVSOUTPUTVIDEOS(S1)-VIDEOAUDIOLRCV-150F DV Cable (optional)STV-250NStereo Video Cable: Signal flowSide witharrowS-150 S-video Cable (optional)Side with arrow
