Canon MV500 Instruction Manual

Contents

99E AdditionalInformationWhen to rechargeYou can recharge a lithium ion battery pack whenever it is convenient. Unlike aconventional battery pack, it does not have to be fully discharged first. However,as the battery pack will naturally discharge itself over time, it is best to charge itthe same day you plan to use it, or the day before.↓↓↓↓100%75%50%25%0%CHANGE THE BATTERY PACKThe indicator in the display shows youapproximately how much charge the batterypack has left:Notes:• When the power is completely exhausted,“CHANGE THE BATTERY PACK” appearsin the display for 4 seconds and the emptybattery mark starts to flash. The powerindicator light also flashes.• The indicator is not constant — differentlevels will be shown when you subject thebattery pack and camcorder to differentconditions.How much power is left?Taking care of the battery packB DAlways attach the terminal cover.• Do not allow any metal objects totouch the terminals, as this can causea short circuit and damage the batterypack. Attach the terminal coverwhenever the battery pack is notbeing used.Keep the terminals clean.• The camcorder, adapter or battery pack will not work properly if the terminalsare dirty. Attach the terminal cover whenever the battery pack is not being used.Storing the battery pack.• If you do not use a battery pack for a period of more than a few months anyremaining charge may cause damage to the battery pack, and reduce usage time.To prevent damage therefore, aim to use a battery pack’s complete chargebefore storage. See the optional battery pack’s instructions for further details.