77EEditingDubbing with Digital Video EquipmentDigital video equipment fitted with the DV terminal lets you edit, copy andtransfer data digitally, with virtually no generation loss in image and soundquality.MV500Side with arrow: Signal flow1. Connect the camcorder and the other digital device.• Connect the Canon CV-150F DV cable (optional) with the side of theplug marked with the arrow facing as shown above.2. Prepare the other device.• Load a blank cassette, and put the other device in record pause mode.• See its instruction manual for details.3. Turn the camcorder’s POWER switch to PLAY (VCR).4. Load a recorded cassette.Preparations1. Find a point on your recorded cassette slightly before thesection you want to dub.2. Press the camcorder’s play button.• Playback starts.3. Start recording on the other device as the section you want tocopy appears on the screen.4. When you get to the point where you want to stop dubbing,press the stop button or the pause button.• Playback stops.Note:• Blanks between recordings on the playback tape are recorded as anomalousimages on the tape that is being recorded to.Dubbing
