124EUsing a Memory Card4. Select MIX TYPE.• CARD CHROMA, CARD LUMI., CAM. CHROMA settings appear.5. Select the desired setting.• Your currently recording image is combined with the pre-recorded stillimage.6. Select MIX LEVEL.7. Adjust the mix level.• Turning the selector dial upwards adjusts to the right and turningdownwards adjusts to the left.8. Close the menu.• CARD MIX flashes in the display.9. Press the card MIX button.• CARD MIX stops flashing.• Your currently recording image is combined with the pre-recorded stillimage.• Each time you press the card MIX button, your selection is activated(display lights continuously) or deactivated (display flashes).1. Press the start/stop button to start and stop recording.• The combined images are recorded onto the cassette.1. Press the PHOTO button halfway down and hold it.• F flashes white in the display as the camcorder adjusts the focus and it isdisplayed continuously as a green mark when the camcorder is ready to takethe image.2. Press the PHOTO button fully down to record the image to thecassette.• F disappears from the display.• The combined images are recorded onto the cassette for approximately 6seconds ( 8 seconds in the SP or LP recording mode).Notes:• If you change the position of the POWER switch, select your still image forCard Mix again.• When setting Card Mix, you must carry out steps 1 to 5.MV550iFor stillsFor moviesOn/Off
