99EEditingAUDIO DUB.••AUDIO INVCR SET UP( 40)REW PLAY FFREMOTE SETSEARCHSELECTZERO SETMEMORYAUDIODUB.STOPAVINSERTPAUSE SLOW+ /– /×2POWERCAMERACAMERAPLAY(VCR)OFFDo not connect/disconnect any cables to/from the camcorder when dubbing audioor preparing to dub audio.PreparationsDubbingTurn the camcorder’s POWER switch to PLAY (VCR) and move the camcorder’sTAPE/CARD switch to TAPE. Load a recorded cassette.• Make sure the REC/SAVE tab on the cassette has been slid to REC (closedposition).Notes:• When using an external microphone \ Connect it to themicrophone terminal.When using the DM-50 microphone \ Make sure nothing isconnected to the microphoneterminal.When using the built-in microphone \ Make sure nothing isconnected to either themicrophone terminal or theaccessory shoe.• When you add sound using the built-in microphone make sure not toconnect any cables to the MIC terminal.• To use your TV to monitor video, connect the S-video terminal ( 35) or theAV terminal (use only the video plug) to your TV. You can monitor the soundwith headphones only when using the S-video terminal ( 33).MV530iMV550i+ PLAY(VCR)TAPE1. Open the menu and select VCR SET UP.2. Select AUDIO DUB.
