83E Using the FullRange of FeaturesYou can also choose to display camcorder data (shutter speed and exposuresettings) in cassette data codes.DATA CODE•••DATE/TIMEDISP.SET UP( 40)Setting the data codeDate/Time Camera data Date/Time &Camera dataTimeDate & TimeDateDATA CODE(cassetteonly)D/TIME SEL.F111/250F111/2501.JAN.200212:00:00 AM12:00 AM1.JAN.2002F111/250F111/2501.JAN.2002F111/25012:00:00 AMF111/25012:00 AM1.JAN.2002Notes:• The data code will read “– – –” in the following situations:– During playback of a blank section of tape.– If the tape was recorded before entering the date and time in the camcorder’smemory.– If the tape was recorded on a camcorder without a data code function.– If noise or tape damage prevents the data code from being read.• If a recording made on MV550i/MV530i is played back on a different DVcamcorder, the data code may not be displayed correctly.• The data code will appear in the display even if DISPLAYS ( 150) has beenset to OFF through the menu.Possible data code combinations for cassettes:To change, open the menu and select DISP.SET UP. Then select DATACODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T andclose the menu.+ PLAY(VCR)TAPE
