144EAdditionalInformation• AV/PHONES is not set to AV in themenu.• AV \ DV OUT (Analog-digitalconverter) is not set to OFF in themenu.• The video heads need cleaning( 140).• The TV/VIDEO selector on the TVisn’t set to VIDEO ( 34-36).• The speaker has been turned off withthe selector dial ( 32).• Headphones are being used.? There’s no picture on the TVscreen.? There’s no picture on the TVscreen, even though the tape ismoving.? There’s no sound coming from thespeaker during playback.Memory card operationsCause and/or what to do about it• It is not turned the right way( 105). Turn it the right way andtry inserting again.• Turn the camcorder's power off andback on again and remove andreinsert the card. If the markcontinues to flash, format thememory card.• The camcorder is not set to CARDCAMERA or CARD PLAY (VCR)( 108, 112) mode.• The memory card is not inserted( 105).• You are using an SD Memory Card andit is set for erasure prevention. Changethe position of the protect switch.• The memory card is full. Eraseimages ( 115) or insert a newmemory card.• The power source is not properlyconnected, or the battery pack isexhausted or not properly attached( 12-16, 135).• The function cannot be used in thatrecording program ( 59).Problem? The memory card will not insert.? The mark flashes red in thedisplay even though a memorycard has been inserted.? Nothing happens when I press thebuttons.
