125E Direct Printing3. Turn the SET dial to select [PRINT] and press the SET dial.• Printing starts. The print setting menu disappears when printing is complete.• If you wish to continue printing, select another still image with the CARD +/– button.❍ Observe the following precautions during printing, otherwise printing may notbe performed correctly.- Do not turn off the camcorder or the printer.- Do not change the position of the TAPE/CARD switch.- Do not detach the cable.- Do not open the memory card cover or remove the memory card.❍ Images not recorded with this camcorder, uploaded from a computer, editedon a computer and images whose file names have been changed may not beprinted correctly.❍ If the message “BUSY” does not disappear, disconnect the cable fromcamcorder and printer and reconnect the camcorder to the printer.❍ Cancel PrintingPress the SET dial during printing. A confirmation dialog appears. Select [OK]and press the SET dial.- Canon Bubble Jet Printer: Printing stops even if it is incomplete and thepaper is fed through.- Canon CP-Printer: A print in progress cannot be stopped. Printing stopswhen the current print is finished and the remaining prints are cancelled.❍ Printing ErrorsIf an error occurs during the printing process, an error message appears( 144).- Canon Bubble Jet Printer: Resolve the error. When printing does not resumeautomatically, select [CONTINUE] and press the SET dial. If [CONTINUE]cannot be selected, select [STOP], press the SET dial and retry printing. Referalso to the printer manual for details.- Canon CP-Printer: Select [STOP] or [RESUME] and press the SET dial. (The[RESUME] setting may not appear with some error messages. In that case,select [STOP].) Refer also to the printer manual for details.- If the error still persists and printing does not restart, follow belowprocedure:1. Disconnect the cable.2. Turn the POWER switch of the camcorder to OFF and back to PLAY (VCR).3. Reconnect the cable.❍ When you have finished printing:1. Disconnect the cable from the camcorder and printer.2. Turn off the camcorder.
