155AdditionalInformationEThe camcorder is set toNETWORK mode.1. Set the camcorder toCARD PLAY mode.2. Disconnect and reconnectthe USB cable.3. Turn off the printer andturn it back on.The printer is notoperating even thoughcamcorder and printerare correctly connected.–PrintingMemory Card OperationMemory card was not facingthe correct direction.Memory card is full.Memory card is notformatted.Memory card is not inserted.File number reachedmaximum value.SD Memory Card isprotected.Camcorder is not set toCARD PLAY mode.Memory card is not inserted.Image is protected.SD memory card isprotected.Card error occurred.Turn the memory card overand reinsert it.Replace the memory card orerase images.Format the memory card.Insert a memory card.Set [FILE NUMBERS] to[RESET] and insert a newmemory card.Change the position of theprotect switch.Set the camcorder to CARDPLAY mode.Insert a memory card.Cancel the protection.Change the position of theprotect switch.Turn off the camcorder.Remove and reinsert thememory card. Format thememory card if flashingpersists.Memory card cannot beinserted.Memory card cannot berecorded.Memory card cannot beplayed back.Image cannot be erased.“ ” flashes red.93931219396931129311593121Problem Cause Solution
