88Turning On the Analog-Digital ConverterOpen the menu and select [VCR SETUP]. Select [AV\DV OUT], set it to[ON] and close the menu.❍ Headphones cannot be used during analog-digital conversion.❍ Depending on the signal sent from the connected device, the conversion fromanalog to digital signals might not work properly (e.g., signals that includecopyright protective signals or anomalous signals such as ghost signals).❍ When connecting to a TV/video with SCART terminal, use a SCART adapterwith input capability (commercially available). The supplied SCART AdapterPC-A10 is for output only.❍ For normal use, set [AV\DV OUT] to [OFF]. If it is set to [ON], digital signalscannot be input via the camcorder’s DV terminal.❍ Depending on the software and the specifications of your computer, you maynot be able to transfer converted signals via the DV terminal.❍ We recommend powering the camcorder from a household power source.❍ You can also press the AV\DV button on the wireless controller. The settingchanges with each press of the button.CARD PLAYCARD CAMERAPLAY (VCR)CAMERAAV DV OUT••••OFFVCR SETUP( 36)
