145AdditionalInformationEMessage ExplanationYou changed the print style after you set the trimming settings.Cancel printing. Turn off the printer and turn it back on. Checkthe printer status.Cancel printing, disconnect the USB cable and turn off the printer.After a while, turn the printer back on and reconnect the USBcable. Check the printer status.When you are printing using the button, check the printsettings.Cancel printing. Turn off the printer and turn it back on. Checkthe printer status.The printer battery is depleted.The printer is experiencing a data transmission error. Cancelprinting, disconnect the USB cable and turn off the printer. After awhile, turn the printer back on and reconnect the USB cable.When you are printing using the button, check the printsettings.Or, you attempted to print from a memory card that contains alarge number of images. Reduce the number of images.The print setting cannot be used for printing with thebutton.The printer is in use. Check the printer status.Printer is warming up. If the message does not disappear after afew seconds, check the printer status.Paper lever error occurred. Adjust the paper selection lever to theproper position.Close the printer cover securely.No print head is installed in the printer or print head is defect.Refer to the instruction manual of your printer.READJUST TRIMMINGPRINTER ERRORPRINT ERRORHARDWARE ERRORRECHARGE THEPRINTER BATTERYCOMMUNICATIONERRORCHECK PRINTSETTINGSPRINTER IN USEPRINTER WARMINGUPPAPER LEVER ERRORPRINTER COVER OPENNO PRINTHEAD
