905. Press the AUDIO DUB. button on the wirelesscontroller.“AUDIO DUB.” and “ a” appear.6. Press the PAUSE a button on the wireless controllerto begin dubbing.• Microphone: Speak into the microphone.• Audio device: Begin playback.7. Press the STOP 3 button on the wireless controllerto stop dubbing.Audio device: Stop playback.❍ Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.Audio dubbing will stop if the tape has a blank section or a section recorded inLP mode or 16-bit mode.❍ When using the built-in microphone, do not connect any devices to the MICterminal or the advanced accessory shoe. When using the DM-50 DirectionalStereo Microphone, do not connect any devices to the MIC terminal.❍ You cannot use the DV terminal for audio dubbing.❍ If you add sound to a tape not recorded with this camcorder, sound qualitymay decrease.❍ Sound quality may decrease when you add sound to the same scene for morethan 3 times.❍ When you connect an audio device, check the picture on the LCD screen andthe sound via built-in speaker or audio device. You can also connect a TV via S-video terminal.❍ When you use the built-in microphone, you can either connect a TV via AVterminal to check the picture, or headphones to check the sound. When youconnect a TV via S-video terminal, you can check the picture on the TV screenand the sound with headphones connected to the camcorder.❍ Set the zero set memory at the end of the scene you wish to dub audio. Thecamcorder will automatically stop audio dubbing at that point.REWPAUSEAV DV REMOTE SETSLOW 2PLAYSTOPFFZERO SETMEMORY12bitAUDIO OUTAUDIO DUB.REWPAUSEAV DV REMOTE SETSLOW 2PLAYSTOPFFZERO SETMEMORY12bitAUDIO OUTAUDIO DUB.REWPAUSEAV DV REMOTE SETSLOW 2PLAYSTOPFFZERO SETMEMORY12bitAUDIO OUTAUDIO DUB.
