LAN settings• WLAN activ./inactiv.Activates/deactivates wireless LAN.• Wireless LAN setupIf your access point is compatible with WPS, set up wireless LAN following the on-screen instructions. Ifnot, select one of the setup methods below.◦ Standard setupSelect when you perform settings for wireless LAN manually using the operation panel of themachine.◦ WPSSelect when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select Pushbutton method or PIN code method according to the method your access point supports, thenfollow the on-screen instructions.◦ Other setupSelect Manual setup if you perform settings by entering the access point's settings directly on themachine. Select Cableless setup if you specify the settings of the access point information to themachine directly from a device (such as a smartphone) without operating the access point. Followthe on-screen instructions of the connecting device for the setup procedure.• AP mode settingsWhen you use the machine as an access point, specify the access point name and the security setting.Before Using the Machine with the Access Point Mode• Print LAN detailsYou can print out the network settings of the machine such as its IP address and SSID.For more information on the machine's network setting is printed out, refer to Printing Out NetworkSetting Information.Important• This printout contains valuable information about your computer. Handle it with care.• Other settings◦ Set printer nameSpecifies the printer name. You can use up to 15 characters for the name.Note• You cannot use the same printer name as that already used for other LAN connected devices.• You cannot use a hyphen for the initial or last character of the printer name.◦ TCP/IP settingsPerforms IPv4 or IPv6 setting.◦ WSD setting204
