Resending Faxes (Redialing a Busy Number)There are two methods of redialing: Automatic redialing and Manual redialing.• Automatic RedialingIf you send a document and the recipient's line is busy, the machine will redial the number after aspecified interval.Automatic Redialing• Manual RedialingYou can redial to the recipients dialed using the Numeric buttons.Manual RedialingImportant• It may be possible that faxes will reach unintended recipients due to the misdialing or incorrectregistration of fax/telephone numbers. When you send important documents, it is recommended thatyou send them after speaking on the telephone.Sending a Fax after Speaking on TelephoneNote• Automatic redialing is enabled by default.• For details on the basic sending operations:Sending Faxes with the Numeric ButtonsAutomatic RedialingYou can enable or disable automatic redialing. If you enable automatic redialing, you can specify themaximum number of redial attempts and the length of time the machine waits between redial attempts.Enable and specify the automatic redialing setting on Auto redial in Adv. FAX settings under Faxsettings.Adv. FAX settingsImportant• While automatic redialing, the unsent fax is stored in the machine's memory temporarily until thesending fax is complete. If a power failure occurs or you unplug the power cord before automaticredialing is complete, all faxes stored in the machine's memory are deleted and not sent.Note• To cancel automatic redialing, wait until the machine starts redialing, then press the Stop button.• To cancel automatic redialing, delete the unsent fax from the machine's memory while the machine ison-standby for a redial operation. For details, see Deleting a Document in Machine's Memory.Manual RedialingFollow the procedure below for manual redialing.720
