Changing the Machine Operation ModeIf necessary, switch between various modes of machine operation.The procedure for configuring Custom Settings is as follows:1. Make sure that the machine is on, and then select Custom Settings from the pop-up menuon the Canon IJ Printer UtilityNote• If the computer is unable to communicate with the machine, a message may be displayedbecause the computer cannot access the function information that was set on the machine.If this happens, click Cancel to display the most recent settings specified on your computer.2. If necessary, complete the following settings:Ink Drying Wait TimeYou can set the length of the machine rest time until printing of the next page begins. Moving theslider to the right increases the pause time, and moving the slider to the left decreases the time.If the paper gets stained because the next page is ejected before the ink on the printed page dries,increase the ink drying wait time.Reducing the ink drying wait time speeds up printing.Display Guide MessageDisplays a guide when you perform operations in which the paper setting procedure is complicated.Hagaki PrintingDisplays the guide message before the machine begins hagaki printing.To hide the guide messages, select the Do not show again check box in the displayed dialog.To display the guide messages again, display the Canon IJ Printer Utility pop-up menu, selectCustom Settings, and then check the Hagaki Printing check box.How to load paperDisplays the guide message before the machine begins printing other than plain paper printingand hagaki printing.To hide the guide messages, select the Do not show again check box in the displayed dialog.To display the guide messages again, display the Canon IJ Printer Utility pop-up menu, selectCustom Settings, and then check the How to load paper check box.Important• With Mac OS X v10.8 or Mac OS X v10.7, you cannot use Display Guide Message.Therefore, if you check the Do not show again check box when a guide message is displayedbefore printing starts, this will stop any more guide messages from being displayed.Prevent paper abrasionThe machine can increase the gap between the print head and the paper during high-densityprinting to prevent paper abrasion.Check this check box to prevent paper abrasion.Prevent paper double-feedSelect this check box only if the machine is feeding multiple sheets of plain paper at the same time.Important• Using this function slows down the print speed.191
