Key to Enjoying Consistent Printing QualityThe key to printing with the optimal printing quality is to prevent the print head from drying or clogging.Always observe the following rules for optimal printing quality.Never unplug the power cord until the power is turned off!If you press the ON button to turn off the power, the machine caps the print head (nozzles) automaticallyto prevent from drying. If you unplug the power cord from the wall outlet while the POWER lamp is lit orflashing, the print head will not be capped properly and this will cause drying or clogging.When unplugging the power cord, make sure that the POWER lamp is not lit.Important• If the power cord is unplugged, the date/time settings will be reset and all documents stored in themachine's memory will be lost. Send or print a necessary document, or save it on a USB flash drivebefore unplugging the power cord.Print periodically!Just as the tip of a felt pen becomes dry and unusable if it has not been used for a long time, even if it iscapped, the print head too, may become dried or clogged if the machine has not been used for a longtime.We recommend you to use the machine at least once a month.Note• Depending on the type of paper, ink may blur if you trace the printed area with a highlight pen orpaint-stick, or bleed if water or sweat comes in contact with the printed area.261
