Making CopiesThis section describes the basic procedure to perform standard copying.1. Make sure that the machine is turned on.2. Load paper.3. Press the COPY button.The Copy standby screen is displayed.Note• When ON is selected for Copy on ECO (2-sided), the Two-sided copy standby screen isdisplayed as shown below. You can copy two original pages or a two sided page onto the bothsides of a single sheet of paper.Follow the procedure below to deactivate two-sided copying temporarily.1. Press the Menu button.2. Use the button to select 2-sided, then press the OK button.3. Use the button to select OFF, then press the OK button.If you do not use two-sided copying as a default, change the copy setting from ECO (2-sided).About ECO settings4. Load the original document on the platen glass or in the ADF.5. Confirm the page size and magnification.1. Magnification2. Page sizeNote• To change or confirm the page size, magnification, or other settings, press the Menu button, thenuse the button to display the desired setting item.Setting Items for Copying• Press the COPY button to reset the magnification to 100%.6. Use the (-) (+) button or the Numeric buttons to specify the number of copies.370
