3-42MultiPASS C530/C560 Chapter 3: Maintenance & Service#7 PRINTER (printer function settings)2. NUMERIC PARAM.No. Function Selecting range Default setting05 Trailing edge margin 0 ~ 9999 7 ( 7 mm)for black&white copy & FAX13 Trailing edge margin 0 ~ 9999 21 ( 21 mm)for color copy & color FAX[Parameter 07]Sets the bottom margin for B/W printing (Copy & Fax). This parameter also sets the margins whenPRINT AGAIN in user data is set to SMALLER for color printing.[Parameter 13]Sets the bottom margin for color printing. The margin used when PRINT AGAIN in user data is setto NORMAL can be changed by this parameter when color printing. However, when the trailingedge of the recording paper passes through the pinch roller when the margins have been narrowed,there are cases where a small amount of color shift occurs at the bottom edge of the image.3. INK ABSORBER CAPAThis switch allows the waste ink capacity stored in the SPCNT board to be checked or entered.[SUCTION]This allows the waste ink capacity for the ink absorbed during cleaning to be checked or entered.When entering the waste ink capacity, use the numeric buttons to enter a value 0 to 100 (%).The ink absorber's absorption capacity for the waste ink discharged by the BJ cartridge isset to a certain amount. The waste ink capacity settings are stored in the SPCNT board'sEEPROM. When replacing the SPCNT board, check the waste ink capacity and enter thewaste ink capacity into the new SPCNT board.The various waste ink capacity can be checked with the SYSTEM DUMP LIST.NOTE
