Chapter 2 Paper Handling 2-17Paper Handling❑ When loading transparencies, insert one sheet of plain paper as the last sheetin the stack.❑ Do not leave film in the multi-purpose tray for long periods of time. Dust anddirt may accumulate on the film resulting in spotty printing.❑ To avoid smudging caused by fingerprints, use a pair of thin cloth gloves whileloading and handling film.❑ To avoid fading, do not expose printed film to prolonged sunlight.❑ Store unused papers and films flat. Do not remove papers from theirprotective packaging until you are ready to use them.❑ Store unused film at temperatures between 59° and 86°F (15° and 30°C). Therelative humidity should be between 10% and 70%.Printing on High Resolution PaperTo load High Resolution Paper in the MultiPASS, follow the same procedure as forloading paper in the multi-purpose tray (see page 2-11). However, before printing,be sure to raise the paper output guides, as described below.After using a package of High Resolution Paper, be sure to perform the cleaningoperation described on page page 2-18.Using the Paper Output GuidesWhen printing on High Resolution Paper or Banner Paper, use the guides on thepaper output tray to help support the printed sheet as it exits the unit. This willkeep the sheet from sagging and pulling through the unit as it exits, which can leadto poor print quality.
