Chapter 4 Sending Faxes 4-15Sending FaxesSequential BroadcastingSending a Document to More Than One DestinationFollow this procedure to scan a document once and send it to several destinations.With this sending method, called sequential broadcasting, you can send the samedocument to a maximum of 113 destinations.This feature allows you to send a document to a number of destinations using acombination of dialing methods as follows:❑ One-touch speed dialing: up to 12 destinations❑ Coded speed dialing: up to 100 destinations❑ Regular dialing (using the numeric buttons): one destinationYou can enter the one-touch speed dialing and coded speed dialing destinations inany order. You can also include one destination which you dial using the numericbuttons. (Be sure to press Set after you enter the destination with the numericbuttons.) You control error reports through the MultiPASS Fax Setup Utility or theoperation panel. If you are using the MultiPASS Fax Setup Utility see theonline MultiPASS Desktop Manager Software Guide. If you are using theoperation panel, see the online Standalone Fax Manual. If you want to cancel a transmission while the unit is waiting to redial, referto Deleting a Document From Memory (see page 4-23).nIf you frequently send the same document to the same group of recipients, usegroup dialing. If you are using the MultiPASS Fax Setup Utility, group dialing isdescribed in the online MultiPASS Desktop Manager Software Guide. If you areusing the MultiPASS as a standalone fax, group dialing is described in the onlineStandalone Fax Manual.n
