Chapter 11 101TroubleshootingIncorrect paper type. When printing directly from a digital camera, on the Operation Panel,confirm that the selected matches the paper loaded.When printing from a computer, check the following.On the [Main] tab of the printer driver, ensure that the [Media Type]selected matches the paper loaded.In the Print dialog box of the printer driver, select [Quality & Media] fromthe pop-up menu, and then ensure that the [Media Type] selected matchesthe paper loaded.FINE Cartridge nozzles clogged orshifted.Print the nozzle check pattern to check for uneven ink output.See “Printing The Nozzle Check Pattern” on page 86.z Ink supply is uneven.See “FINE Cartridge Cleaning” on page 90.See “FINE Cartridge Deep Cleaning” on page 91.z If straight lines are shifted.See “Aligning The FINE Cartridge” on page 92.Print Quality is not set properly. Be sure to set the [Print Quality] setting to [High] in Windows, or [Fine] inMacintosh.1. Open the printer properties dialog box.2. On the [Main] tab, click [High] for the [Print Quality] setting.When you cannot choose the [High] setting or when the print quality doesnot improve, select [Custom], click [Set] and then adjust the [Quality bar]for higher print quality.1. Open the [Print] dialog box.2. Select [Quality & Media] from the pop-up menu and then click [DetailedSetting].3. Drag the [Print Quality] slide bar to the [Fine] end.Media not loaded printside up. Check that your paper is loaded with the correct print side facing up.The paper stack exceeds thecapacity of the Auto Sheet Feeder.If the paper stack exceeds the Load Limit Mark, or exceeds the capacity ofthe Auto Sheet Feeder, reduce the amount of paper. See “RecommendedPaper” on page 17.There is some foreign matter in theAuto Sheet Feeder.Check and remove any foreign matter.The Paper Output Tray is closed. Open the Paper Output Tray.Cause Action
