Chapter 4 51Reading From And Writing To A Memory Card7 Use [ ] or [ ] to select or , then press[OK].Read-only mode: The Card Slot is used only for reading. Be sure to select this modewhen printing photos from a memory card.Read/write mode: The Card Slot is used as the memory card drive of the computer.Photo data can be written into the memory card.Note Be sure to select when printing photos.Important z Windows 2000, when the write protection is enabled on the machine: Ifthe computer does not detect that the write protection is enabled, adelayed write-error might occur and data could be corrupted whenattempting to copy data to a memory card.z You cannot write to memory cards when the machine is in MemoryCard mode.Note To change the write protection setting while a card is inserted in the CardSlot, unplug the USB cable before changing the setting, then plug it backin afterwards. The new setting is not applied unless you plug the USBcable back in.
