Canon PIXMA MP970 SERIES Network Setup Manual

Also see for PIXMA MP970: Supplementary guide Quick start guide Setup instructions Quick start guide Quick start guide

Contents

Network Setup GuideThis manual contains the setup information required to use the machine over wired LAN.If you use the machine with USB connection, refer to your setup sheet.IntroductionTo use the machine connected to a computer, you need to install the software called “MP Drivers” inthe computer.The following two connection types are described in this manual.Setting up for use over LANWhen the machine has not been connected to thenetwork, perform this setup to use the machine over LAN.This setup procedure requires settings to be performed onthe machine and the computer.Importantz A hub and LAN cable are required to connect this machine to a LAN. These must be purchasedseparately.z If the installation and adjustment of the machine have not been finished, refer to your setup sheet to setup the machine properly.Notez The configuration and the type of the device vary depending on your network environment. For details,refer to your device’s instruction manual or contact its manufacturer.z In an office setup, consult your network administrator.Notez To set up the machine that is not yet connected to a LAN, connect the machine and the computer with aUSB cable.z Even if the machine has been set up to be used with the USB connection, follow the setup proceduredescribed in this manual to connect the machine to a LAN for the first time.