Canon PIXMA MP970 SERIES Network Setup Manual

Also see for PIXMA MP970: Supplementary guide Quick start guide Setup instructions Quick start guide Quick start guide

Contents

2411 After the MP Drivers are installed, start up theCanon IJ Network Tool to mount the Card Slot.For details on the network setup of the Card Slot,refer to “Using the Card Slot over a Network” in theUser’s Guide on-screen manual.2-B Setting up an additional LAN-connectedcomputerThis section describes how to set up an additional computer to use the machine over wired LAN,when the machine has already been set up to connect to the network using another computer. Thissetup procedure only requires settings to be performed on the additional computer.1 Make sure that the machine is connected tothe network device with a LAN cable.2 On the Canon IJ Network Tool screen,select LAN connection, then click OK.If the Canon IJ Network Tool does not start upautomatically, select Library > Printers > Canon >BJPrinter > Utilities > Canon IJ Network Tool.Notez To confirm the machine’s MAC address, display themachine’s network setting information referring to“Displaying and Initializing Network Settings” in theUser’s Guide on-screen manual.z For details on how to scan, refer to the User’sGuide and Scanning Guide on-screen manuals.Notez If MAC or IP address filtering is configured to restrictaccess to the machine, make sure beforehand toregister those addresses of the computer you aresetting up. To register the addresses, use the CanonIJ Network Tool on the computer that has alreadybeen set up.z Make sure that the computer you are setting up isnot connected to the machine with a USB cable.This setup procedure does not involve connectingthe USB cable.NoteIf you select USB connection, the Canon IJ NetworkTool will exit without setting up the machine to be usedover LAN.