Canon PIXMA MP970 SERIES Network Setup Manual

Also see for PIXMA MP970: Supplementary guide Quick start guide Setup instructions Quick start guide Quick start guide

Contents

223 When the Check Wired LAN Connectiondialog box appears, connect the machine tothe network devices such as hubs with a LANcable, then click Yes.(A) Wired LAN connector4 Confirm that the setup program detects themachine automatically.The machine connected with the USB cable isdetected automatically via LAN connection.5 When the Setup Completion dialog boxappears, remove the USB cable, then clickOK.The network connection between the machine andthe computer is now successfully established.The Printer Setup Utility (Print Center in Mac OS Xv.10.2.8) and Canon IJ Network Scanner Selectorwill start up.NoteThe connection may vary depending on your networkenvironment.NoteIf the machine was not detected, the Set Printer IPAddress dialog box appears. Make sure of thefollowing, then click Connect.z The network devices such as hubs or routers areturned on, and the machine and the computer areconnected to the network.z The machine is connected to the computer with theUSB cable.z The IP address to be set for the machine isdisplayed on the Set Printer IP Address dialogbox. If it is different from the address you want toset for the machine, enter the desired IP addresson the Set Printer IP Address dialog box.(If the machine is turned off, the Set Printer IPAddress dialog box does not appear.)If it still fails, see “The Set Printer IP Address dialogbox is displayed during setup” on page 29.(A)