Canon PIXMA MX700 series Quick Start Manual

Also see for PIXMA MX700 Series: Supplementary guide Brochure & specs Cleaning guide Network Setup Guide Quick start guide

Macintosh® Software Installationrn Note• Since Mac as 9, Mac as x Classic environments, or Mac as x v.10.2.7 or earlierare not supported, do not connect the machine to these.• The screens below refer to Mac as x v.1 OA.x installation. Screens may varydepending on the operating system you are using.• Log on as an Administrator.• Before installing the software, disable all anti-virus programs and automaticallyloading programs.o Connect one end of the USB cable to the computer and theother to the machine.rnNoteMake sure the machine is turned on.f} Turn on your Mac and insert the Setup CD-ROM.rn NoteIf the CD-ROM folder does not open automatically, double-click the CD-ROM iconon the desktop.€) Double-click the Setup icon.o When the Authenticate screen appears, enter youradministrator name and password. Click OK.If you do not know your administrator name or password, click?, then follow the on-screen instructions.o When the main menu appears, click Easy Install.The MP Drivers, On-screen Manuals, and application software are installedautomatically...... .... __..... _....... _........rn NoteIf you want to select particular items to install, click Custom Install and follow the on-screen instructions to proceed with the installation.o When the list of applications to install appears, confirm thecontents, then click Install.rnNoteMove the cursor over items to display explanations of each application.o Read the License Agreement carefully and click Yes. Thesoftware installation screen may appear during the installationprocess. Follow the on-screen instructions to install thesoftware.o When the Setup Complete screen appears, click Next.€) When the User Registration screen appears, click Next.rn NoteTo register later, click Cancel and go to Step lID. After software installation is complete,double-click on the desktop.Follow on-screen instructions to register your product. You will need yourproduct serial number, which is located on the inside of the machine. SeeStep 1- 0 on the front page.® When the Installation completed successfully screenappears, click Restart.1~1The system is restarted automatically.When using Mac OS X v.10.2.8 to v.10.3.3:Restarting the computer while connected to the machine may cause themachine not to be detected. To resolve this, either unplug the USB cablethen plug it back in again, or turn the machine off then back on again.rn Note• When using Mac as x v.1 0.2.8 to v.1 0.3.x, before using the Operation Panel onthe machine to save originals scanned from the Platen Glass or the ADF to thecomputer, it is necessary to select MP Navigator EX as the launch application onImage Capture under Applications folder. For details, refer to "Scanning Images"in the User's Guide on-screen manual.• If straight lines are misaligned or print quality is not satisfactory after installing theMP Drivers, you may need to align the Print Head. Refer to "Aligning the PrintHead" in the Quick Start Guide.• XXX FAX (where "XXX" is your machine's name) is shown in the Printer Name list(Product list in Mac as x v.1 0.2.8 to v.1 0.3.x), but you cannot add XXX FAX. Youcan fax the document with the current print settings applied to it if your computer isequipped with an internal modem. You cannot send faxes from your computer via themachine.ID When the Canon IJ Network Tool screen appears, selectUSB connection, then click OK." .... " 0 ...... ....... _ .. _ .... _____ tou •• , ",1nI"_~'~'_""" ....... IUSI.__ .....l_'_ """""" .If .......... ' ' _ h.tNO_-. .. II .. [1.A.'l __'1Itf\ _Ml .....Software installation is now complete.Nindows Vista" is a trademark of Microsoft Corporation. "Macintosh" and "Mac" are trademarks of Apple Inc., registered in the U.S. and other countries. 072007YT PRINTED IN THAILANDMacintosh® Software Installationrn Note• Since Mac as 9, Mac as x Classic environments, or Mac as x v.10.2.7 or earlierare not supported, do not connect the machine to these.• The screens below refer to Mac as x v.1 OA.x installation. Screens may varydepending on the operating system you are using.• Log on as an Administrator.• Before installing the software, disable all anti-virus programs and automaticallyloading programs.o Connect one end of the USB cable to the computer and theother to the machine.rnNoteMake sure the machine is turned on.f} Turn on your Mac and insert the Setup CD-ROM.rn NoteIf the CD-ROM folder does not open automatically, double-click the CD-ROM iconon the desktop.€) Double-click the Setup icon.o When the Authenticate screen appears, enter youradministrator name and password. Click OK.If you do not know your administrator name or password, click?, then follow the on-screen instructions.o When the main menu appears, click Easy Install.The MP Drivers, On-screen Manuals, and application software are installedautomatically...... .... __..... _....... _........rn NoteIf you want to select particular items to install, click Custom Install and follow the on-screen instructions to proceed with the installation.o When the list of applications to install appears, confirm thecontents, then click Install.rnNoteMove the cursor over items to display explanations of each application.o Read the License Agreement carefully and click Yes. Thesoftware installation screen may appear during the installationprocess. Follow the on-screen instructions to install thesoftware.o When the Setup Complete screen appears, click Next.€) When the User Registration screen appears, click Next.rn NoteTo register later, click Cancel and go to Step lID. After software installation is complete,double-click on the desktop.Follow on-screen instructions to register your product. You will need yourproduct serial number, which is located on the inside of the machine. SeeStep 1- 0 on the front page.® When the Installation completed successfully screenappears, click Restart.1~1The system is restarted automatically.When using Mac OS X v.10.2.8 to v.10.3.3:Restarting the computer while connected to the machine may cause themachine not to be detected. To resolve this, either unplug the USB cablethen plug it back in again, or turn the machine off then back on again.rn Note• When using Mac as x v.1 0.2.8 to v.1 0.3.x, before using the Operation Panel onthe machine to save originals scanned from the Platen Glass or the ADF to thecomputer, it is necessary to select MP Navigator EX as the launch application onImage Capture under Applications folder. For details, refer to "Scanning Images"in the User's Guide on-screen manual.• If straight lines are misaligned or print quality is not satisfactory after installing theMP Drivers, you may need to align the Print Head. Refer to "Aligning the PrintHead" in the Quick Start Guide.• XXX FAX (where "XXX" is your machine's name) is shown in the Printer Name list(Product list in Mac as x v.1 0.2.8 to v.1 0.3.x), but you cannot add XXX FAX. Youcan fax the document with the current print settings applied to it if your computer isequipped with an internal modem. You cannot send faxes from your computer via themachine.ID When the Canon IJ Network Tool screen appears, selectUSB connection, then click OK." .... " 0 ...... ....... _ .. _ .... _____ tou •• , ",1nI"_~'~'_""" ....... IUSI.__ .....l_'_ """""" .If .......... ' ' _ h.tNO_-. .. II .. [1.A.'l __'1Itf\ _Ml .....Software installation is now complete.Nindows Vista" is a trademark of Microsoft Corporation. "Macintosh" and "Mac" are trademarks of Apple Inc., registered in the U.S. and other countries. 072007YT PRINTED IN THAILAND

/ 191

Related manuals for Canon PIXMA MX700 Series