Canon PIXMA MX700 series Quick Start Manual

Also see for PIXMA MX700 Series: Supplementary guide Brochure & specs Cleaning guide Network Setup Guide Quick start guide

2 Prepare to load paper.(1) Open the Rear Tray, then pull out the PaperSupport.Put your finger in the rounded indent of thePaper Support and pull it out until it stops.(2) Open the Paper Output Tray.(3) Extend the Output Tray Extension.(4) Press the Feed Switch button so that the RearTray lamp (A) lights. (3) (2)3 Load the paper.(3) Slide the Paper Guide against the left side ofthe paper stack.~ NoteYou can also select the paper source with the printer driver.For details, refer to the PC Printing Guide on-screen manual.(1) Load the paper in the Rear Tray with the printside facing UP.(2) Align the paper stack against the Cover Guideon the right side of the Paper Support.~ NoteMake sure that the Cover Guide is set uprightwhen you load paper in the Rear Tray.* Do not load higher than the Load LimitMark (A).4 Specify the page size and media type settings according to the loaded paper.~ Note• When performing copy direct printing without using a computer, select the size and type of theloaded paper using the Operation Panel.For details on settings, see "Setting Items" on page 22 or "Setting Items" on page 30.• When using the machine connected to a computer, select the size and type of the loaded paperin Page Size (or Paper Size) and Media Type in the printer driver.For details on printer driver settings, see "Printing with Windows" on page 32 or "Printing withMacintosh" on page 33.Before Using the Machine 152 Prepare to load paper.(1) Open the Rear Tray, then pull out the PaperSupport.Put your finger in the rounded indent of thePaper Support and pull it out until it stops.(2) Open the Paper Output Tray.(3) Extend the Output Tray Extension.(4) Press the Feed Switch button so that the RearTray lamp (A) lights. (3) (2)3 Load the paper.(3) Slide the Paper Guide against the left side ofthe paper stack.~ NoteYou can also select the paper source with the printer driver.For details, refer to the PC Printing Guide on-screen manual.(1) Load the paper in the Rear Tray with the printside facing UP.(2) Align the paper stack against the Cover Guideon the right side of the Paper Support.~ NoteMake sure that the Cover Guide is set uprightwhen you load paper in the Rear Tray.* Do not load higher than the Load LimitMark (A).4 Specify the page size and media type settings according to the loaded paper.~ Note• When performing copy direct printing without using a computer, select the size and type of theloaded paper using the Operation Panel.For details on settings, see "Setting Items" on page 22 or "Setting Items" on page 30.• When using the machine connected to a computer, select the size and type of the loaded paperin Page Size (or Paper Size) and Media Type in the printer driver.For details on printer driver settings, see "Printing with Windows" on page 32 or "Printing withMacintosh" on page 33.Before Using the Machine 15