21Preparing the CameraPreparing the Camera, Basic FunctionsSetting the Date/TimeThe Set Date/Time menu will appear the firsttime the camera power is turned on orwhenever the built-in rechargeable lithiumbattery charge is low, start from Step 4.1 Turn the power on (p. 31).2 Press the MENUbutton and selectthe [ (Set up)]menu using theleft or right button.3 Press the up ordown button toselect (Date/Time), and thenpress the SETbutton.4 Set the date andtime.z Press the left or rightbutton to select the itemyou wish to set.z Press the up or downbutton to change itsvalue.z The date can be set up to the year 2030.5 Press the SET button.6 Press the MENU button.z The date, time and other camerasettings may reset to the default settingsif the batteries have been removed formore than three weeks. If this happens,reset these settings.z For embedding the date on the imagedata, refer to page 55.z To set the camera so that the date andtime will not appear on the image when itis being shot but only when it is printed,see either Setting the Print Style (p. 105)or the Direct Print User Guide suppliedwith the Camera.
