113123456789CoverPreliminary Notes andLegal InformationContents:Basic OperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesP ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuidePlayback ModeCoverAdvanced Guide7 Setting MenuPower-Saving AdjustmentAdjust the timing of automatic camera and screen deactivation (Auto PowerDown and Display Off, respectively) as needed (=29).zz Choose [Power Saving], and then pressthe <m> button.zz After choosing an item, press the<q><r> buttons to adjust it as needed.• To conserve battery power, you should normally choose [On] for[Auto Power Down] and [1 min.] or less for [Display Off].• The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].• These power-saving functions are not available when you have set Eco mode(=112) to [On].Screen BrightnessAdjust screen brightness as follows.zz Choose [LCD Brightness], and thenpress the <q><r> buttons to adjust thebrightness.• For maximum brightness, press and hold the <p> button for at least onesecond when the shooting screen is displayed or when in single-image display.(This will override the [LCD Brightness] setting on the [3] tab.) To restorethe original brightness, press and hold the <p> button again for at least onesecond or restart the camera.Hiding the Start-up ScreenIf you prefer, you can deactivate display of the start-up screen normallyshown when you turn the camera on.zz Choose [Start-up Image], and thenchoose [Off].Formatting Memory CardsBefore using a new memory card or a card formatted in another device, youshould format the card with this camera.Formatting erases all data on a memory card. Before formatting, copyimages on the memory card to a computer, or take other steps to back themup.1 Access the [Format] screen.zz Choose [Format], and then press the<m> button.
