54123456789CoverPreliminary Notes andLegal InformationContents:Basic OperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesP ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuidePlayback Mode4 Specify the new color.zz Position the center frame over the newcolor, and then press the <r> button.XX The specified color is recorded.5 Specify the range of colors toreplace.zz Press the <o><p> buttons to adjust therange.zz To replace only your specified color,choose a large negative value. To replacecolors similar to your specified color aswell, choose a large positive value.zz Press the <m> button to return to theshooting screen.6 Shoot.• Using the flash in this mode may cause unexpected results.• In some shooting scenes, images may look grainy and colors maynot look as expected.Special Modes for Other PurposesStill ImagesAuto Shooting After Face Detection(Smart Shutter)Auto Shooting After Smile DetectionThe camera shoots automatically after detecting a smile, even without youpressing the shutter button.1 Choose [ ].zz Follow steps 1 – 2 in “Specific Scenes”(=49) and choose [ ], and thenpress the <p> button.zz Press the <q><r> buttons to choose[ ], and then press the <m> button.XX The camera now enters shooting standbymode, and [Smile Detection on] is displayed.2 Aim the camera at a person.zz Each time the camera detects a smile, itwill shoot after the lamp lights up.zz To pause smile detection, press the <q>button. Press the <q> button again toresume detection.• Switch to another mode when you finish shooting, or the camera willcontinue shooting each time a smile is detected.• You can also shoot as usual by pressing the shutter button.• The camera can detect smiles more easily when subjects face the camera andopen their mouth wide enough so that teeth are visible.
