120123456789CoverPreliminary Notes andLegal InformationContents:Basic OperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesP ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuidePlayback ModeCoverAdvanced Guide8 Accessories3 Turn the TV on and switch tovideo input.zz Switch the TV input to the video input youconnected the cable to in step 2.4 Turn the camera on.zz Press the <1> button to turn the cameraon.XX Images from the camera are nowdisplayed on the TV. (Nothing isdisplayed on the camera screen.)zz When finished, turn off the camera andTV before disconnecting the cable.• Correct display is not possible unless the camera video outputformat (NTSC or PAL) matches the TV format. To change thevideo output format, press the <n> button and choose [VideoSystem] on the [3] tab.• When the camera and TV are connected, you can also shoot while previewingshots on the larger screen of the TV. To shoot, follow the same steps as whenusing the camera screen.However, AF-Point Zoom (=45) and Stitch Assist (=57) are notavailable.Still Images MoviesPowering the Camera with Household PowerPowering the camera with AC Adapter Kit ACK-DC90 (sold separately)eliminates the need to monitor the remaining battery level.1 Make sure the camera is off.2 Open the cover.zz Follow step 2 in “Inserting the Batteryand Memory Card” (=12) to openthe memory card/battery cover, and thenopen the coupler cable port cover asshown.3 Insert the coupler.zz Insert the coupler facing the directionshown, just as you would a battery(following step 3 in “Inserting the Batteryand Memory Card” (=12)).zz Make sure the coupler cable passesthrough the port.TerminalsCoupler Cable Port
