98123456789CoverPreliminary Notes andLegal InformationContents:Basic OperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesP ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuidePlayback ModeCoverAdvanced Guide6 Wi-Fi Functions• After you have accessed the Wi-Fi menu once, you can access it again bypressing the <o> button. The recent target device is listed first, so you caneasily connect again by pressing the <o><p> buttons to choose it. To adda new device, display the device selection screen by pressing the <q><r>buttons, and then configure the setting.If you prefer not to display recent target devices, press the <n> button,and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].• To add multiple cameras, repeat the above procedures starting from step 1.• Once a camera is added, the camera nickname will be displayed on the screenin step 3. To connect to a camera again, simply choose the camera nicknamefrom the list.Connecting to a ComputerConfigure computer settings for the connection, add the computer as aconnection destination, and transfer images to the computer wirelesslyusing the software CameraWindow as follows.• When connected to a computer, the camera is used to establish theconnection and then the computer (software CameraWindow) is used totransfer images.Preparing to Register a ComputerPrepare to register a computer.Checking Your Computer EnvironmentFor computer environments that allow Wi-Fi connection with a camera, referto “System Requirements” (=19).Additionally, the software CameraWindow must be installed (=19).• Windows 7 Starter and Home Basic editions are not supported.• Windows 7 N (European version) and KN (South Korean version)require a separate download and installation of Windows MediaFeature Pack.For further details, see the following website.http://go.microsoft.com/fwlink/?LinkId=159730
