Canon PowerShot Elph 340 HS IXUS 265 HS User Manual

Also see for IXUS 265 HS: Getting started Getting started

Contents

Canon PowerShot Elph 340 HS IXUS 265 HS User Manual Manual pdf 107 page image

107Before UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBefore UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexSending ImagesImages sent from the camera are automatically saved to the computer.If the computer that you intend to send images to is turned off, the imageswill be stored temporarily on the CANON iMAGE GATEWAY server. Storedimages are regularly erased, so make sure to turn on the computer andsave the images.zz Follow the steps in “Connecting to WPS-Compatible Access Points” (=94) tochoose [ ].zz Once the connection is established, theimages are sent.zz When the images have been sentsuccessfully to the CANON iMAGEGATEWAY server, [ ] is displayed onthe screen.zz Images are automatically saved to thecomputer when you turn it on.zz Images are automatically sent to Webservices from the CANON iMAGEGATEWAY server, even if the computeris off.• When sending images, you should use a fully charged battery packor an AC adapter kit (sold separately, =120).• Even if images were imported to the computer through a different method, anyimages not sent to the computer via CANON iMAGE GATEWAY will be sent tothe computer.• Sending is faster when the destination is a computer on the same network asthe camera, because images are sent via the access point instead of CANONiMAGE GATEWAY. Note that images stored on the computer are sent toCANON iMAGE GATEWAY, so the computer must be connected to the Internet.Geotagging Images on the CameraGPS data recorded on a smartphone using the dedicated CameraWindowapplication (=89) can be added to images on the camera. Images aretagged with information including the latitude, longitude, and elevation.• Before shooting, make sure the date and time and your home timezone are set correctly. (See “Setting the Date and Time” (=12).)Additionally, in [Time Zone] (=113), specify any shootingdestinations that are in other time zones.• The smartphone you will use for geotagging must be authorized toview the images on the camera (=96, 99).• Others may be able to locate or identify you by using location datain your geotagged still images or movies. Be careful when sharingthese images with others, as when posting images online wheremany others can view them.COPY