Canon PowerShot Elph 340 HS IXUS 265 HS User Manual

Also see for IXUS 265 HS: Getting started Getting started

Contents

Canon PowerShot Elph 340 HS IXUS 265 HS User Manual Manual pdf 70 page image

70Before UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBefore UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexImage Viewing OptionsStill ImagesMagnifying Images1 Magnify an image.zz Moving the zoom lever toward <k> willzoom in and magnify the image. Youcan magnify images up to about 10x bycontinuing to hold the zoom lever.zz To zoom out, move the zoom levertoward <g>. You can return to single-image display by continuing to hold it.2 Move the display position andswitch images as needed.zz To move the display position, press the<o><p><q><r> buttons.zz While [ ] is displayed, you can switchto [ ] by pressing the <m> button.To switch to other images while zoomed,press the <q><r> buttons. Press the<m> button again to restore the originalsetting.• You can return to single-image display from magnified display by pressing the<n> button.Approximate Position ofDisplayed AreaStill Images MoviesViewing SlideshowsAutomatically play back images from a memory card as follows. Eachimage is displayed for about three seconds.zz Press the <m> button, choose [.] inthe menu, and choose the desired option(=21).zz The slideshow will start after [Loadingimage] is displayed for a few seconds.zz Press the <n> button to stop theslideshow.• The camera’s power-saving functions (=19) are deactivatedduring slideshows.• To pause or resume slideshows, press the <m> button.• You can switch to other images during playback by pressing the <q><r>buttons. For fast-forward or fast-rewind, hold the <q><r> buttons down.• In image search mode (=68), only images matching search conditions areplayed.Changing Slideshow SettingsYou can set up slideshows to repeat, and you can change the transitionsbetween images and the display duration of each image.1 Access the setting screen.zz Press the <n> button, and thenchoose [Slideshow] on the [1] tab(=22).COPY