60Before UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBefore UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexStill ImagesShooting with Servo AFThis mode helps avoid missing shots of subjects in motion, because thecamera continues to focus on the subject and adjust the exposure as longas you press the shutter button halfway.1 Configure the setting.zz Press the <n> button, choose[Servo AF] on the [4] tab, and thenchoose [On] (=22).2 Focus.zz The focus and exposure are maintainedwhere the blue AF frame is displayedwhile you are pressing the shutter buttonhalfway.• Focusing may not be possible in some shooting conditions.• In low-light conditions, Servo AF may not be activated (AF framesmay not turn blue) when you press the shutter button halfway. In thiscase, the focus and exposure are set according to the specified AFframe mode.• If adequate exposure cannot be obtained, shutter speeds andaperture values are displayed in orange. Release the shutter button,and then press it halfway again.• AF lock shooting is not available.• [AF-Point Zoom] on the [4] tab is not available.• Not available when using the self-timer (=32).Still ImagesChanging the Focus SettingYou can change default camera operation of constantly focusing onsubjects it is aimed at, even when the shutter button is not pressed. Instead,you can limit camera focusing to the moment you press the shutter buttonhalfway.zz Press the <n> button, choose[Continuous AF] on the [4] tab, and thenchoose [Off] (=22).On Helps avoid missing sudden photo opportunities, because the cameraconstantly focuses on subjects until you press the shutter button halfway.Off Conserves battery power, because the camera does not focus constantly.COPY