117Wi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBefore UseBasic GuideAdvanced GuideCamera BasicsAuto Mode /Hybrid Auto ModeOther Shooting ModesP ModeTv, Av, M, C1, and C2 ModePlayback ModeSelecting a Range1 Choose [Select Range].z Following the procedure in “Using theMenu” (= 116), choose [Select Range]and press the [ ] button.2 Choose a starting image.z Press the [ ] button.z Press the [ ][ ] buttons or turn the [ ]dial to choose an image, and then pressthe [ ] button.3 Choose an ending image.z Press the [ ] button to choose [Lastimage], and then press the [ ] button.z Press the [ ][ ] buttons or turn the [ ]dial to choose an image, and then pressthe [ ] button.z Images before the first image cannot beselected as the last image.Choosing Images Individually1 Choose [Select].z Following the procedure in “Using theMenu” (= 116), choose [Select] andpress the [ ] button.2 Choose an image.z Press the [ ][ ] buttons or turn the [ ]dial to choose an image, and then pressthe [ ] button. [ ] is displayed.z To cancel selection, press the [ ] buttonagain. [ ] is no longer displayed.z Repeat this process to specify otherimages.3 Protect the image.z Press the [ ] button. A confirmationmessage is displayed.z Press the [ ][ ] buttons or turn the [ ]dial to choose [OK], and then press the[ ] button.● Images will not be protected if you switch to Shooting mode orturn the camera off before finishing the setup process in step 3.● You can also select or clear images by touching the screen instep 2, and you can access the confirmation screen by touching[ ].● You can also protect images by touching [OK] on the screen instep 3.
