161AccessoriesAppendixIndexBefore U s eBasic GuideAdvanced GuideCamera BasicsAuto M o d e /Hybrid Auto M o d eOther Shooting M o d e sPModeTv,Av, M , C1, a n d C2 M o d ePlaybackModeWi-Fi FunctionsSetting M e n uSwitching the Color of Screen InformationStill Images MoviesInformation displayed on the screen and menus can be changed to a colorsuitable for shooting under low-light conditions. Enabling this setting isuseful in modes such as [ ] (= 70).z Choose [Night Display] on the [ 2] tab,and then choose [On] (= 31).Using Eco ModeThis function allows you to conserve battery power in Shooting mode.When the camera is not in use, the screen quickly darkens to reducebattery consumption.1 Configure the setting.z Choose [Eco Mode] on the [ 2] tab, andthen choose [On].z [ ] is now shown on the shootingscreen (= 193).z The screen darkens when the camerais not used for approximately twoseconds; approximately ten secondsafter darkening, the screen turns off.The camera turns off after approximatelythree minutes of inactivity.2 Shoot.z To activate the screen and prepare forshooting when the screen is off but thelens is still out, press the shutter buttonhalfway.Electronic Level CalibrationCalibrate the electronic level if it seems ineffective in helping you level thecamera.For greater calibration accuracy, display grid lines (= 102) to help youlevel the camera in advance.1 Make sure the camera is level.z Place the camera on a flat surface, suchas a table.2 Calibrate the electronic level.z Choose [Electronic Level] on the [ 1] tab,and then press the [ ] button.z Choose [Calibrate] and press the[ ] button. A confirmation message isdisplayed.z Choose [OK], and then press the [ ]button.Resetting the Electronic LevelRestore the electronic level to its original state as follows. Note that this isnot possible unless you have calibrated the electronic level.z Choose [Electronic Level] on the [ 1] tab,and then press the [ ] button.z Choose [Reset], and then press the [ ]button.z Choose [OK], and then press the [ ]button.
