20Camera BasicsAuto M o d e /Hybrid Auto M o d eOther Shooting M o d e sPModeTv,Av, M , C1, a n d C2 M o d ePlaybackModeWi-Fi FunctionsSetting M e n uAccessoriesAppendixBefore U s eIndexAdvanced GuideBasic Guide4 Close the cover.z Lower the cover (1) and hold it down asyou slide the switch, until it clicks into theclosed position (2).● For guidelines on how many shots or hours of recording can besaved on one memory card, see “Number of Shots per MemoryCard” (= 212).Removing the Battery Pack and Memory CardRemove the battery pack.z Open the cover and press the batterylock in the direction of the arrow.z The battery pack will pop up.Remove the memory card.z Push the memory card in until it clicks,and then slowly release it.z The memory card will pop up.(1)(2)Inserting the Battery Pack and Your Memory CardInsert the included battery pack and a memory card (sold separately).Note that before using a memory card that is new or has been formattedin another device, you should format the memory card with this camera(= 160).1 Open the cover.z Slide the switch (1) and open the cover(2).2 Insert the battery pack.z Holding the battery pack with the terminalsin the position shown, hold the batterylock toward (1) and insert the battery packtoward (2) until the lock clicks shut.z If you insert the battery pack facing thewrong way, it cannot be locked into thecorrect position. Always confirm that thebattery pack is facing the right way andlocks when inserted.3 Check your card’s write-protectswitch and insert the memory card.z Recording is not possible on memorycards with a write-protect switch when theswitch is in the locked position. Move theswitch toward (1).z Insert the memory card with the label (2)facing as shown until it clicks into place.z Make sure the memory card is facing theright way when you insert it. Insertingmemory cards facing the wrong way maydamage the camera.(2)(1)(1)(2)(2)(1)
