43Playback ModeWi-Fi FunctionsSetting M e n uAccessoriesAppendixIndexOther Shooting M o d e sPModeTv,Av, M , C1, a n d C2 M o d eBefore U s eBasic GuideAdvanced GuideCamera BasicsAuto M o d e /Hybrid Auto M o d e2 Shoot.z Auto zooming continues even after youshoot, and the frames are still displayed.z To cancel auto zooming, press the [ ]button again. [ Auto: Off] is displayed.● A face may not be displayed at a constant size relative to thescreen at some zoom factors, or if the person’s head is tilted orfacing the camera indirectly.● During movie recording, a changed zoom factor and cameraoperating sounds are recorded.● When Auto is on, some shooting information is not displayed,and some shooting settings cannot be configured.● Auto zooming to keep multiple subjects on the screen is notperformed during movie recording, even if faces are detected.● You can zoom in or out with the zoom lever, but the original zoomfactor will be restored in a few seconds after you release thelever.● Auto zooming is not performed during continuous shooting.● If multiple faces are detected in step 2, you can change theface used as the main subject by touching the face or pressingthe [ ] button. However, the [ ] button cannot be used forselection during movie recording.● When a detected subject moves toward the edge of the screen,the camera zooms out to keep the subject on the screen.● The zoom factor cannot be changed after you press the shutterbutton all the way down in self-timer mode (= 45).● The camera prioritizes zooming to keep subjects on the screen.For this reason, it may not be possible to maintain a constantface display size, depending on subject movement and shootingconditions.● When no face is detected, the camera zooms to a certain leveland stops zooming until a face is detected.● If you prefer to shoot at the zoom factor of the screen in step 1,press the shutter button all the way down.● You can adjust the zoom factor that the camera reverts to whenyou release the [ ] button by moving the zoom lever to resizethe white frame while you hold the [ ] button.● To adjust the area displayed when the [ ] button is pressed,access MENU (= 31) ► [ 7] tab ► [ Display Area], andchoose one of the three options.● The zoom factor cannot be changed with the [ ] button afteryou press the shutter button all the way down in self-timer mode(= 45).Auto Zooming in Response to SubjectMovement (Auto Zoom)Still Images MoviesThe camera automatically zooms in and out to keep a detected face(= 90) at a constant size. If the person moves closer, the cameraautomatically zooms out, and vice versa. This size can also be adjusted,as needed.1 Enter [ ] Auto mode.z Press and release the [ ] button quickly.z [ ] is displayed.z A white frame is displayed around thedetected face, and the camera zoomsin and out to keep the subject on thescreen.z When multiple faces are detected, awhite frame is displayed around the mainsubject’s face and up to two gray framesaround other faces, as the camera zoomsto keep these subjects on the screen.
