114Automated Playback (Slide Show)Starting a Slide ShowSlide show image settings are based on DPOF standards (p. 122).1 In the [ (Replay)] menu, select [SlideShow] and press .• See Selecting Menus and Settings (p. 36).2 Select [Program] using C or D on themulticontroller. Then select between [AllImages] or one of [Show 1]-[Show 3] usingB or A on the multicontroller.3 Select [Start] using C or D on themulticontroller and press .• The slide show will start and automatically stop when the show is done.Pausing and Resuming a Slide Show• Press to pause the show. Press it again to resume.Fast Forward / Rewinding a Slide Show• Use B or A on the multicontroller to move to the previous or next image.Stopping a Slide Show• Press the button during a slide show to stop it and display the slideshow menu.4 When the slide show is over, press the button.• The slide show menu appears again. Press the button again to closethe menu.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• Movie images play for the length of time that they were recorded regardless of thetime set in the slide show settings.• The power-saving function is disabled while a slide show plays on the camera (p. 25).All Images Plays all the images on the CF card in orderSlide Show 1 - 3 Plays the images selected for each show in order (p. 115)
