80Setting the White BalanceWhen the white balance mode is set to match the light source, the camerareproduces colors more accurately.1 Press the / / button.2 Select * (Auto) using C or D on themulticontroller.* The current setting is displayed.3 Select the desired setting using B or Aon the multicontroller.• Please see the next page regarding thecustom setting.• You can shoot the image right after selecting settings by pressing the shutterbutton. This screen will appear again, once the image in shot.4 Press or the / / button.5 Shoot the image.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• The white balance cannot be adjusted when the photo effect is set to (Sepia)or (B/W).Auto Settings are automatically set by the cameraDaylight For recording outdoors on a bright dayCloudy For recording under overcast, shady or twilight skiesTungsten For recording under tungsten and bulb-type 3-wavelength fluorescent lightingFluorescent For recording under warm-white, cool-white or warm-white (3-wavelength) fluorescent lightingFluorescent H For recording under daylight fluorescent, or daylight fluorescent-type 3-wavelength fluorescent lightingFlash For flash photographyCustom1 For setting a custom value with a white sheet of paper, etc., to obtain the optimal white balancefor the conditions. There are two custom values: custom1 and custom2.Custom2
