47Shooting - Letting the Camera Select SettingsReviewing an Image Right after ShootingReviewing the ImageAfter a photo is taken, the image displays on the LCD monitor for two seconds.There are two ways to display the image for longer.2Keeping the Shutter Button PressedThe image continues to appear on the LCD monitor as long as you keep theshutter button fully depressed.2Pressing while the image is displayedIf you press while the image is displayed on the LCD monitor, it will continue todisplay even after the shutter button is released. Press the shutter button halfwayagain to stop displaying it.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• You can perform the following while images are displayed.– Erasing Images Individually (p. 9, 119)– Displaying Images in detailed display mode (p. 28)– Magnifying Images (p. 106)– Changing the Recording Format (p. 52)– Attaching Sound Annotations (p. 113)Changing the Recording Format Right after ShootingBy following the below instructions, you can save images shot in the JPEG formatin the RAW format (p. 52) right after shooting if the camera is set to , , , ,or *. You can easily process images saved in the RAW format using a computerto edit the resolution, photo effect and white balance without any loss of quality.* The JPEG format image will not be saved.1 Right after shooting, press the / / button whilethe image is displayed on the LCD monitor.2 Select [OK] using B or A on themulticontroller and press .• The image is recorded in the RAW format.• When you press the shutter button halfway, thecamera returns to the shooting screen.
