45Shooting - Letting the Camera Select SettingsAuto ModeIn this mode, all you have to do is press the shutter button and let the camera doeverything else.1 Check that the camera is in Shooting mode (p. 24).2 Turn the shooting mode dial to .3 Aim the camera at the subject.4 Use the zoom lever to achieve the desired composition(relative subject size in the viewfinder).5 Press the shutter button halfway (p. 33).• Two beeps will sound when the camera hasfinished metering, and the indicator beside theviewfinder will light green or orange. If the LCDmonitor is on, the AF frame will appear green.• The shutter speed and aperture value areautomatically determined and show on the LCDmonitor if it is on.• The yellow indicator will blink and the beep will sound one time if thesubject is difficult to focus on. The AF frame will also appear yellow. ( Whenthe AF frame is set to Auto selection it will not appear)6 Press the shutter button all the way (p. 33).• You will hear the sound of the shutter when the shutter activates.• The picture appears for two seconds on the LCD monitor, if it is on.Shooting - Letting the Camera Select SettingsAF FrameSee Functions Available in Each Shooting Mode (p. 180) at the end of thismanual to find out which settings can be changed in which Shooting modes.
