1342 Trim the Image.Changing the Size of the Trimming Frame• Slide the zoom lever toward or .• The trimming frame can be changed to aminimum selection of approximately half thedisplayed image or a maximum selection that isvirtually the same size as the image.• You can cancel the trimming setting by sliding the zoom lever towardagain when the trimming frame is already set to the maximum size.• When printing an image that has been magnified using the trimmingoption, the image quality may become coarser and grainier depending onthe magnifying rate. With direct print function compatible printers, thetrimming frame displays in red.Setting the Portion of the Trimming Frame• Move the trimming frame using C, D, B or A on the multicontroller.Rotating the Trimming Frame• You can rotate the trimming frame by pressing the button.3 Press the button to close thesetting menu.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• The trimming setting only applies to one image.• The trimming setting is cancelled with the following operations.- When you set the trimming settings for another image.- When you close the Print mode (when you turn the camera power off, changethe camera mode, or detach the direct interface cable).- When you try to expand the trimming frame beyond its maximum size.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• The selected Image Settings, Paper and Border setting determine the shape of thetrimming frame.• Please use the LCD monitor to set the trimming settings. The trimming frame maynot display correctly on a TV monitor.Trimming FrameSetting the Print Settings (Direct Print Function) (continued)
