Tutorial: Running a Shoot2428. Your camera is now ready to shoot tethered.Setting Up a WiFi CameraThe software can receive photos wirelessly from any Canon Wireless File Transmitter(WFT) using an FTP server. You will need to have a wireless internet connection set up onyour computer to use a WiFi camera.Follow these steps to set up your WiFi camera for the shoot:1. Select the Manage Studio tab from the bottom of the software and select theCameras from the top of the studio.2. Select WiFi Camera from the left side of the software under Select Camera Type.3. Make sure the WFT is connected to your camera.4. Turn the camera on.5. Use the WFT connection wizard through the camera menu. For more details onfinding the WFT wizard, refer to the camera manual.6. Select FTP as the communication method in the camera wizard.7. Enter your wireless network & router settings in the camera wizard.8. Once the FTP Server settings appear on your camera, enter the FTP Address andFTP Port listed on the Cameras page in the software. You must have Auto-DetectAddress checked for this option.9. Once Login Method appears on your camera, use either ―Anonymous‖ or matchthe username and password defined below. You must have AnonymousUsername checked to login anonymously without a password.10. Once Target Folder appears on your camera, select Root Folder.11. Complete the Wizard.12. Your WiFi camera is now ready to shoot wirelessly.Ensure that your camera has been detected and appears in the software in both theCameras studio tab and in the status bar, located at the very bottom left of thesoftware.
